1. Construction of the RE Capital 2- Substation Control Building

1. Design/ Construct & Furnish the O&M Building

1.      Platform construction.

2.      Equipment foundations

3.      Structural steel supply/ assemble & install

4.      Primary plant equipment installation including stringing

5.      Kerbing

6.      Procure, supply and install yard stone

1. Refurbish Transformer 6a,6b and 6c bays by constructing 1 x 20MVA 88/6.6kV Transformer bays consist.

2. Refurbish 1 x 88kV line bay and constructing 1 x 88kV line bay.

3. Extend the Earth mat from the newly extended substation side.

4. Install 1 x Transformer bund wall

5. Replace existing fence with new palisade fence.

6. Rotate 1 x 10.5m existing beam by 180° or Construct 1 x 10.5m new beam

7. Construct 6.6kV Twin Bull Busbar (stringing only)

8. Construct 2 x 88kV Bull Busbar (stringing only)

9. Replace 54 x 88KV Long rods including Clamps

10. Install 1x lightning mast

11. Dismantle all primary plant equipment/ cabling and foundations.

12. Procure, supply and install yard stone.

1. Steel Assembly and Erection.

2. All Secondary Works Including:

3. Earthing of Structural Steel Work and Primary Plant Equipment.

4. Stringing & Clamps.

5. Control & Protection Cabling.

1. All Secondary Works Including:

2. Stringing Bull Conductor.

3. Control and Protection Cabling.

4. Control Panels Installation & Wiring.

Bulk Earthworks, Earth Grid, Equipment Foundations, Complete Control Room, Steel Assembly and Erection, Install Primary Plant Equipment, Stringing, Control and Protection Cables, Labelling

1. Construct 66kV busbar Isolator, 66kV transformer breaker, 3x 66kV current transformers and install new 1x 10MVA 66/22kV transformer on the reserved space.

2. Extend the existing 66KV beam and normalize the existing 1x10MVA 66/22kV transformer.

3. Construct fire wall between the transformers.

4. Construct 22kV kiosk breakers for the MV transformers protection.

5. Normalize existing vertical busbar by constructing box type busbar structure.

6. Construct a beam to connect MV side of the transformer to its MV bays.

7. Replace 2x Existing Reclosers by 2 x Kiosk Breakers, 2x Existing Feeder Isolators by 2 x New Knife link Isolators, 1x Existing Transformer 1 22kV Kiosk Breaker by 1 x New Kiosk Breaker.

8. Construct new 22kV feeder bay for new Nqobi feeder.